Always insist on proper installation by an experienced plumber.
Before putting to use, water-test for at least 5 hours must be done. This helps to ensure and correct
damage, if any, during plumbing in transit or in manufacturing process.
Vertical flat-bottom tanks must be placed on a static, flat, solid and levelled surface to maintain
uniform bottom support.
Outlet connections must be fixed vertically (90 Degree) to the surface of the tank.
Heavy type of valves and pipes for inlet and outlet connections must be installed and fixed on a support.
White layered tanks are recommended for indoor installation or under sun-shades. Colour / Black
layered tanks are for outdoor use.
Outlet connections should be fixed atleast 1 inch above the bottom-level.
